Modem Cables

SCS "Plug and Play" Modem Audio and Frequency Control Cable Options

Cables Shipped with Modems:

Audio Cable:

Every SCS modem is shipped with a 5 foot (1.5 meter) audio cable with a European DIN plug on the modem end to mate with the modem audio jack.

The other end of the cable is open (no connector).

Frequency Control Cable:

The PTC-IIpro, PTC-IIusb and PTC-IInet are shipped with a 5 foot (1.5 meter) frequency control cable with a European DIN plug on the modem end to mate with the modem frequency control jack.

The other end of the cable is open (no connector).

Special Cable Options

Custom cables are available for most makes of HF marine and HF/VHF amateur transceivers.

The available custom cables are listed below or will be found as part of our “Plug and Play” modem kits which are configured for most of the amateur and marine HF transceivers.

_____________________________________________________________________________________________________

Audio Connection Cable ICOM 8-pin DIN

Part Number 8090

CA$37.80

Connect your PTC-II series PACTOR modem to any ICOM Transceiver with the ACC 8 Pin DIN plug.

IC-M802,

IC-M710,

IC-M700Pro,

IC- M700 (only with opt. ACC connector)

Learn More

Audio Connection Cable ICOM 13-pin DIN

Part Number 8110

CA$37.80

Connect your PTC-II series PACTOR modem to any ICOM Transceiver with the ACC 13-pin DIN plug.

IC-7000,

IC-706,

IC-718...

Learn More

Audio Connection Cable ICOM 9-pin Sub-D

Part Number 8190

CA$37.80

Connect your PTC-II series PACTOR modem to the ICOM Transceiver with 9-pin Sub-D plug.

(IC-M801 and IC-M710 GMDSS)

Learn More

Audio Connection Cable for KENWOOD 13-pin DIN

Part Number 8160

CA$37.80

Connect your PTC-II series PACTOR modem to all KENWOOD Transceiver with the ACC 13-pin DIN plug.

TS-2000,

TS-440,

TS-450,

TS-570,

TS-850,

TS-870...

Learn More

Audio Connection Cable YAESU and KENWOOD 6-pin Mini DIN

Part Number 8120

CA$33.60

Connect your PTC-II series PACTOR modem to the YAESU and KENWOOD Transceiver with Mini DIN connector:

FT-100/817/857/897/450,

TS-480...

Learn More

Audio Connection Cable for Packet 9K6 8-pin Mini DIN

Part Number 8050

CA$33.60

Connect your PTC-II series PACTOR modem to a VHF/UHF Transceiver with a 8-pin Mini DIN plug.

Learn More

Audio Connection Cable Extension 8-pin DIN 2 Meter

Part Number 8140

CA$25.20

Is your modem located farther away from the radio to be reached by one cable? This cable is designed to be used as a cable extension.

Learn More

Audio Connection Cable Extension 8-pin DIN 3 Meter

Part Number 8150

CA$27.30

Is your modem located farther away from the radio to be reached by one cable? This cable is designed to be used as a cable extension.

Learn More

Adapter Cable 6-pin Mini DIN to 8-pin DIN

Part Number 8180

CA$10.50

This adapter will connect your TRACKER TNC to your radio.

Learn More

Audio Connection Cable 5-pin DIN Plug with open end cables

Part Number 8010

CA$11.34

If you have a transceiver that we cannot offer a ready to use cable, you need this to connect your PTC-IIex.

Learn More

Audio Connection Cable 5-pin Mini DIN Plug with open end cables

Part Number 8015

CA$11.34

If you have a transceiver for that we cannot offer a ready to use cable, you need this to connect your TRACKER.

Learn More

Audio Connection Cable 8-pin DIN Plug with open end cables

Part Number 8020

CA$11.35

If you have a transceiver that we cannot offer a ready to use cable, you need this to connect to your modem.

Learn More

Transceiver Remote Control Cable RS232

Part Number 8080

CA$33.60

This cable is used to connect the PTC-IIpro, PTC-IIusb and PTC-IInet to the RS-232 remote control of your transceiver.

Learn More

Transceiver Remote Control Cable RS232 with Gender Changer

Part Number 8083

CA$33.60

This cable is used to connect the PTC-IIpro, PTC-IIusb and PTC-net transceiver control port plug with the ICOM M802 and ICOM M801 remote control port.

Learn More

Transceiver Remote Control Cable ICOM CI-V

Part Number 8170

CA$33.60

This connection cable allow the PTC-IIusb, PTC-IIpro and PTC-IInet to control your ICOM Radio over the Computer Software e.g. Airmail.

Learn More

Transceiver Remote Control Cable YAESU Mini DIN

Part Number 8130

CA$33.60

Connect your PTC-IIpro, PTC-IIusb and PTC-IInet to the YAESU transceivers with 8-pin Mini DIN control connector: FT-100/817/857/897/450.

Learn More

Transceiver Remote Control Cable YAESU FT-847

Part Number 8085

CA$33.60

Connect your PTC-IIpro, PTC-IIusb and PTC-IInet to the YAESU FT-847 remote control port.

Learn More

Transceiver Remote Control Cable 13-pin DIN with open end cables

Part Number 8070

CA$12.96

If you have a transceiver that we cannot offer a ready to use cable, you need this to connect to your modem.

Learn More

GPS Connection Cable

Part Number 8060

CA$25.20

The PTC-IIusb and PTC-IInet are equipped with terminals for the GPS signal cables. This Y-Cable will allow you to connect your GPS to the PTC-IIex modem.

Learn More

Data Connection Cable PC RS232

Part Number 8040

CA$6.30

Connect your PTC-IIex or PTC-IIpro to the PC serial port (com port).

Learn More

You're currently on:

Modem Cables

SCS "Plug and Play" Modem Audio and Frequency Control Cable Options

Cables Shipped with Modems:

Audio Cable:

Frequency Control Cable:

Special Cable Options

Connect your PTC-II series PACTOR modem to any ICOM Transceiver with the ACC 8 Pin DIN plug.

Connect your PTC-II series PACTOR modem to any ICOM Transceiver with the ACC 13-pin DIN plug.

Connect your PTC-II series PACTOR modem to the ICOM Transceiver with 9-pin Sub-D plug.

Connect your PTC-II series PACTOR modem to all KENWOOD Transceiver with the ACC 13-pin DIN plug.

Connect your PTC-II series PACTOR modem to the YAESU and KENWOOD Transceiver with Mini DIN connector:

Connect your PTC-II series PACTOR modem to a VHF/UHF Transceiver with a 8-pin Mini DIN plug.

Is your modem located farther away from the radio to be reached by one cable? This cable is designed to be used as a cable extension.

Is your modem located farther away from the radio to be reached by one cable? This cable is designed to be used as a cable extension.

If you have a transceiver that we cannot offer a ready to use cable, you need this to connect your PTC-IIex.

If you have a transceiver for that we cannot offer a ready to use cable, you need this to connect your TRACKER.

If you have a transceiver that we cannot offer a ready to use cable, you need this to connect to your modem.

This cable is used to connect the PTC-IIpro, PTC-IIusb and PTC-IInet to the RS-232 remote control of your transceiver.

This cable is used to connect the PTC-IIpro, PTC-IIusb and PTC-net transceiver control port plug with the ICOM M802 and ICOM M801 remote control port.

This connection cable allow the PTC-IIusb, PTC-IIpro and PTC-IInet to control your ICOM Radio over the Computer Software e.g. Airmail.

Connect your PTC-IIpro, PTC-IIusb and PTC-IInet to the YAESU transceivers with 8-pin Mini DIN control connector: FT-100/817/857/897/450.

Connect your PTC-IIpro, PTC-IIusb and PTC-IInet to the YAESU FT-847 remote control port.

If you have a transceiver that we cannot offer a ready to use cable, you need this to connect to your modem.

The PTC-IIusb and PTC-IInet are equipped with terminals for the GPS signal cables. This Y-Cable will allow you to connect your GPS to the PTC-IIex modem.

Connect your PTC-IIex or PTC-IIpro to the PC serial port (com port).

Recently Viewed Products

My Cart

Compare Products